45
FAÇADES
•
Frame and curtain wall with clear
solar double glazing without solar
protections (average Uw value
1.5 W/m²K).
ROOFS
•
Green: 765 m².
•
Improved terrace: 250 m² (see
also the “Innovation” issue -
pages 28-29 of this report).
HOT AND COLD PRODUCTION
•
Production of heat using a 125 kW
heat pump and two 250 kW gas
condensing boilers.
•
Production of cold with a 4.71 kW
ESEER* high-energy performance
integrated compact unit.
•
Air treatment through fan
convectors, dynamic beams,
and four ventilation units; the
ventilation units of the meeting
rooms are independent of the
units for the fan convectors.
•
Modulating DDC electronic
regulation**.
•
Centralised technical
management.
LIGHTING
•
Office area consumption:
7.39 W/m² (T5 fittings suspended
on rail with brightness probe
integrated into the lights).
•
LED on presence detectors with
auto shut-off if nobody is around.
•
Management of light flow
according to daylight.
SANITARY FACILITIES
•
Optical-sensor taps for
washbasins.
•
Showers and lockers in
basement.
•
Implementation of an anti-
waste safety device containing
presence detection and solenoid
valve on sanitary facilities.
•
Replacement of rainwater, human
waste water, and used water
system.
PARKING
•
113 car parking spaces, including
four for people with reduced
mobility.
•
40 bicycle parking spaces.
•
Electric car charging point.
•
Ventilation of parking according
to CO rate.
LIFTS
•
Traffic study to determine the
sizing of the lifts according to
their use.
•
Replacement of lifts for
consumption optimisation and
compliance.
FAÇADES
•
Solar protection.
HOT AND COLD PRODUCTION
•
Gas condensing boilers.
•
Ventilation with heat recovery
(type C for nursing home part +
type D for service flat part).
LIGHTING
•
Downlights with energy-saving
lamps.
•
Movement detection.
•
LED lighting.
SANITARY FACILITIES
•
Rainwater recovery for sanitary
facilities and garden watering.
MOBILITY
•
Proximity to public transport.
•
Inside and outside parking
spaces for bicycles.
WASTE SORTING
•
Composting.
•
Separate waste collection (eight
fractions).
•
Underground containers.
CUSTOMER RELATIONSHIP
MANAGEMENT
•
Data entry in CRM for:
- access control;
- nurse call;
- communication
(ip-TV, ip-phone, internet);
- accounting.
* ESEER: European Seasonal Energy Efficiency Ratio.
** DDC: Direct Digital Control.